New Supplier Hide Flag logic implemented in PROD on 15 October 2024.
Check runs both during pre-calculation and after pre-calculation (any update on FOL is taken into consideration). Before, it was applied only in post-calculation jobs.
Pre-calculation: RCA1 assignment
Post-calculation: anytime a change is done to an FOL, related to RCA 2 and RCA3 (by supplier and admin)
Based on changes to RCA3, more FOLs might be shown to supplier.
But what is already visible to supplier will not change to hidden (visible stays visible).
IMPORTANT! Non-Delivery and Late Delivery Exclusion Flags have no impact on FOL visibility for supplier (they only have impact on NET performance calculation). If an FOL has been visible to Supplier and Admin activates Non-Delivery Exclusion Flag, then that FOL will remain visible to supplier.
NOTE: New logic does NOT apply to historical data. Only FOLs after 15 October are processed based on new logic.
Consideration Type 5 means: |
|||
Not Delivered Net > 0 AND Not Delivered Net <> Order Quantity Metro Units | |||
Order Quantity |
Non Delivered Quantity |
Consideration Type 5 Satisfied |
|
100 |
60 |
Yes* |
|
100 |
100 |
No |
|
100 |
0 |
No |
|
Case 1
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank | blank | No |
Hidden (this step is only for pre-calculation) Outside pre-calculation with same condition FOL is shown. This is possible when RCA3 = Supplier is assigned and later removed by Admin. Then FOL will keep showing for supplier. |
Example:
Case 2
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank |
From 17-42 (Metro) |
No | Hidden |
Example:
Case 3
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank |
From 1-16 (Supplier) |
No | Show |
Example:
Case 4
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank | blank | Yes | Show |
Example:
Case 5
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank | From 1-16 (Supplier) |
Yes | Show |
Example:
Case 6
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| 21-25 | blank | blank | From 17-42 (Metro) |
Yes | Show |
Example:
Case 7
| RCA1 | RCA2 | RCA2 Approved/Rejected? | RCA3 | Consideration Type 5 satisfied | FOL Shown/Hidden? |
| blank | any | any | any | Any | Show |
Examples:
Consideration Type 5 is not a factor anymore because there is no RCA1 assigned --> so no Consideration Type 5 on FOL
Consideration Type 5 Satisfied = Yes
Consideration Type 5 Satisfied = No